PBN-30

Chaser bin - the reloading store bunker

Chaser bin - the reloading store bunker

The reloading trailer PBN-30

Reloading trailer special constructed for transportation of grain from the combine and reloading it into other machines or containers. Also this machine can provide fast loading of seeders and loading BigBags.

Main advantages:

1. Increasing of the combine threshing by more then 30% - harvester does not stop and unloads grain while moving.

2. Working on the wet field (Big tires with low pressure can easily goes through light swamps and mud).

3. Reducing of seeding machine idle time under loading (the productivity of seeding machines increases up to 30% per shift).

4. Weighing of grain on the field with the check issue or sending GPS data to an operator computer.

Grain reloading trailer consist of one of the best EU parts, for example: Italian suspension (ADR firm), Polish discs (Pronar) with BKT, Mitas tires. All reducers and cardan shafts are Italian (Bondioli and Pavesi).

This model is also available on tandem, double-axle (ADR Italy)/

Technical characteristics

PBN-30

Full weight, kg

28 200

Trailer weight, kg

6 900

Load-carrying capacity, kg

21 300

Sizes        Length of trailer, mm 8 500
                 Height of trailer, mm                    3 480
                 Width of trailer, mm 2 460
Volume, m3                    30
Auger, Diameter, mm                     520
Unloading height, mm 4 300
Unloading rate, t/min

6/12

Support of the drawbar hydraulically
Coupling with tractors, B.H.P. 180-220
Tires

560/60 R 22,5

650/50 R 22,5

650/55 R 26,5

Technical characteristics of the reloading trailer

  1. Two-axle tandem with springs and jet thrust (ADR Italy) axel 110х2300 all-in-one-piece
  2. Tires 560х60 R22,5 (load 6,3т. while 30km/h.)
  3. Pneumatic braking system (possible: hydraulic,mixed)
  4. Body V-30m3 vehicle capacity 21t. 
  5. Auger Ø520 mm. (productivity 6t/min., unloading height 4,3 m.)
  6. Replaceable trailed ring Ø40, 50, 90 mm.
  7. Hydraulic trailer hitch leg
  8. Driving reducer S2100 (produced by Bondioli and Pavesi, Italy)
  9. Auger lip
  10. Whole-rolled helix (thickness 8/4mm produced by Tecnofer, Italy)
  11. Service ladder
  12. Horizontal auger cleaning mechanism (three windows)

Additional options

  • Weighting system with the printer (Dinamica Generale, Italy)
  • Awning system (unpacks from the ground)
  • Cardan shaft with protection coupling (cutoff bolt)
  • PVC sleeve Ø 400 мм., length 1,2 m. (for seeding machine loading)
  • Auger lip (regulates hydraulically)
  • Trailed hemisphere under the ball Ø80
  • Reinforced suspension with tire 650/55 R26.5 (load 8,0т. while 40km/h.)

Contacts

KOBZARENKO Sp. z o.o.
Milenijna 2
97-410 Żłobnica

Dział handlowy: +48 502 265 650
Zaopatrzenie: +48 512 305024
Administracja, księgowość: +48 503 776 010
Administracja, księgowość: +48 600 214 705
Księgowość: +48 504 427 150
Kadry: +48 573 976 357